Possible problems with your Miele tumble dryer and how to repair
A Miele dryer can exhibit various problems that prevent it from functioning as it should.
With the list of problems and error codes that the device may indicate below, you can try to determine why your device is not functioning properly..
We believe it is important that appliances function for longer.
- If you might be able to solve the problem yourself, we will provide tips.
- Aarzel niet om ook eens in onze algemene tips te gaan kijken (in het menu bij Eerste Hulp).
- If the problem is too complex or dangerous to solve yourself, we will advise having a repair carried out by a technician. However, even then, this list can help you provide us with the correct information, allowing the technician to prepare adequately and possibly bring all the necessary spare parts with them..
Common problems with a Miele tumble dryer are:
Kortsluiting in de temperatuurvoeler koelmiddel.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F2
Stroomstoring temperatuurvoeler koelmiddel.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F3
Kortsluiting temperatuurvoeler proceslucht.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F4
Stroomstoring temperatuurvoeler proceslucht.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F30
Verschillend signaal deur en deurcontact.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F36
Deurcontact defect.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F39
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F40
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F41
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F43
Geen geprogrammeerd type aanwezig/verkeerde variant.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F45
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F46
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F50
Dit is geen storing.
De trommel is te vol.
Miele droogkast F53
Aandrijfmotor defect/storing in de elektronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F55
Het wasgoed is na de maximale droogtijd van 180 minuten nog niet droog.
Neem bij ieder droogprogramma de maximale belading in acht. Informatie over de belading vind je in de gebruiksaanwijzing.
Centrifugeer het wasgoed voordien in de wasmachine met een hoger centrifugetoerental.
Reinig de pluizenfilters zoals in de gebruiksaanwijzing is beschreven.
Contacteer We.repair indien het probleem zich blijft voordoen.
Miele droogkast F66
Reinig de pluizenfilters achter de deur en onderaan.
Steek minder wasgoed in het toestel
Verwijder voorwerpen die het ventilatierooster onder de deur blokkeren.
Open bij het drogen een deur of raam voor extra ventilatie, zodat de lucht naar binnen kan stromen.
Miele droogkast F99
Het toestel is geblokkeerd.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F104
De netspanning op de aandrijfmotor is te laag.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F108
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F156
Kortsluiting in de temperatuurvoeler koelmiddel na de condensor.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F157
Stroomstoring in de temperatuurvoeler koelmiddel na de condensor.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F158
Toestel is oververhit.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F159
Startfout compressor.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F206
Kortsluiting in de temperatuurvoeler koelmiddel na de compressor.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F207
Stroomstoring in de temperatuurvoeler koelmiddel na de compressor.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast F242
Storing electronica.
Dit kan je vermoedelijk niet vlot en veilig zelf verhelpen. Boek een reparatie bij We.repair.
Miele droogkast Streepjes '---' op de display en programma stopt vroegtijdig.
Onvoldoende ventilatie. Open tijdens het drogen de deur of het raam, zodat er meer lucht kan binnenstromen.
Verwijder voorwerpen die het ventilatierooster onder de deur blokkeren.
Reinig de pluizenfilter in de deur en bij de vulopening.
Reinig de warmtewisselaar.
Centrifugeer het wasgoed in de wasmachine met een zo hoog mogelijk centrifugetoerental.
Miele droogkast Technische storing
Reinig de pluizenfilters achter de deur en onderaan.
Als het programma niet kan worden gestart of als het hetzelfde bericht opnieuw verschijnt, is er sprake van een defect en kan u best een reparatie boeken bij We.repair.
Miele droogkast 0 en Einde verschijnen op de display van de droogkast of het controlelampje Kreukbeveiliging/Einde brandt. Het programma werd vroegtijdig afgebroken. De zoemer klinkt.
De elektronica herkent dat er geen wasgoed in de trommel zit en breekt het programma af.
Drying loose or already dry laundry may also cause the program to stop.
In the future, dry small amounts of laundry using the Warm Air program.
Clear the message from the display by opening and closing the door.Miele dryer 3 leds on/flashing
There was a power interruption during an ongoing program.
Restart the program.
Miele dryer 888
Deactivate the demo mode:
For Dryers with an ON/OFF button:
- Turn off the dryer.
- Close the door.
- Press and hold the Start/Stop sensor button.
- Turn on the dryer while holding the Start/Stop sensor button.
- The Start/Stop sensor button will flash.
- After 5 seconds, the Start/Stop sensor button will light up continuously.
- Release the Start/Stop sensor button briefly.
- Press and hold the Start/Stop sensor button again for 3 seconds.
- The Start/Stop sensor button will turn off.
For Dryers with no ON/OFF button:
- Turn on the dryer.
- Open the door.
- Press and hold the Start/Stop sensor button.
- Close the door while holding the Start/Stop sensor button.
- After 5 seconds, the Start/Stop sensor button will light up continuously.
- Release the Start/Stop sensor button briefly.
- Press and hold the Start/Stop sensor button again for 3 seconds.
- The sensor button Start/Stop no longer lights up.Miele dryer ADD
This is not a malfunction.
AADD indicates that the door can be opened to add or remove laundry. If you do not want to add more laundry, no action is needed.
If you do want to add laundry, open the door, place the laundry in the drum or remove it, close the door, and press the Start/Drum Fill sensor button.
Miele dryer showing bars '=== ... -== ...== ... -= ...'
This is not a malfunction.
After the programme starts, the electronics of the device calculates the remaining time of the drying programme and several bars appear on the display.
After about 1 minute, the remaining time will appear, counting down in one-minute intervals.
Miele dryer with 'load correction' and "?"
The electronics recognise that the drum is empty, only filled with loose pieces of laundry or with laundry that is already dry, and it interrupts the programme..
In the future, dry small amounts of laundry using the Warm Air program.
Clear the message on the display by opening and closing the door again.
Miele dryer red light on
Clean the lint filters behind the door and at the bottom.
Miele dryer with 'Locked' indicator light on
The door is locked for safety during the ongoing programme.
The indicator light goes out again at the end of the programme.
Miele dryer Drying indicator light flashing
The position of the programme selection switch has changed after the programme started.
The programme works as intended, however..
Reset the originally selected programme. The indicator light goes out.
Miele dryer Controlelampje Luchtkanalen reinigen brandt
Clean the lint filters behind the door and at the bottom.
Miele dryer with Empty reservoir indicator light on
Empty the condensation reservoir or check if the drainage hose is kinked.
Miele dryer with Air channels cleaning indicator light on
The blinking indicates that a programme can be started.
After the programme starts, the light no longer flashes but stays on continuously.
This does not need to be resolved.
Miele dryer with Locked indicator light flashing
The lock has been activated. The programme cannot be started.
To disable the lock:
- Close the door and set the program selector to End.
- Turn on the appliance.
- Press and hold the Wrinkle Protection button throughout steps 4 to 6.
- Turn the program selector slowly clockwise to Cotton - Cupboard Dry.
- Turn the program selector slowly counterclockwise to End.
- Turn the program selector slowly counterclockwise to Crease-resistant - Iron Dry. The 'Locked' indicator light will stop flashing.
- Release the Wrinkle Protection button.
The lock is disabled.
Miele dryer displaying Ctrl
If the "Remote Control" function is enabled (program mode P97, programming option 01), Ctrl appears at the start of a programme. The tumble dryer is connected to the Miele Cloud via the Miele app..
The "Remote Control" function can be disabled (programming mode P97, programming option 00), so that the Ctrl message no longer appears at the start of the programme..
Miele dryer with a dark display and Start Stop flashing
The dryer is on standby. It is a normal programme function..
This does not need to be resolved.
Press any key to exit standby.
More information about this can be found in the user manual.
Miele dryer Display shows stripes/veils
The contrast of the display is not optimally set for the individual lighting conditions.
You can resolve the issue yourself by setting the contrast to a lower level, as described in the user manual..
Miele dryer display texts in another language
Depending on the model, you can change the language using the programming features or through the "Settings" menu option.
The flag symbol on the display indicates the selected language.
More information can be found in the user manual.
Miele dryer does not dry properly
The cargo consisted of various types of textiles.
Dry the laundry afterwards with warm air or choose a programme that is more suitable next time.
Tip: You can set the residual moisture of some programmes separately in the settings or in the programming functions.
Miele dryer maakt klikkende geluiden
Due to the residual moisture control, clicking sounds may occur.
These sounds are very normal for a tumble dryer.
Miele dryer door Filter cleaning keeps appearing, but the filters have been cleaned
When the tumble dryer is switched off, the appliance cannot register the opening and closing of the door, and the message is therefore not reset.
How to resolve: switch the device on, open the door, clean the filter, close the door, press the OK button and switch the appliance off.
Miele dryer program takes long or is interrupted
The room where the tumble dryer is located is too warm. Ensure sufficient ventilation.
Detergent residues, hair, and small lint can cause blockages. Clean the lint filters and the base filter, and remove visible lint from the heat exchanger.
The laundry is unevenly distributed or rolled up. The drum is too full. Shake out the laundry and remove some from the drum.
The air supply via the grille at the bottom right is blocked. Remove objects obstructing the airflow.
The laundry is too wet. Spin it in the washing machine at a higher speed.
The laundry has metal zippers, which prevented an accurate humidity measurement. Open the zippers next time.
If the problem occurs again, dry this laundry using the "Warm air" program.
Miele dryer information about lint removal/end of program
Clean the lint filters behind the door and at the bottom.
Miele dryer Cold air or "End" flashes, and the program was interrupted early. The buzzer sounds.
The cause of the issue is not immediately clear.
Turn the tumble dryer off and on again and start a program.
If the program is interrupted again and the error message reappears, there is a defect, and you should book a repair with We.repair.
Miele dryer noC in the display
"noC" may appear when selecting the MobileStart program. "noC" stands for "no Connection".
More details can be found in the user manual of your appliance, under the chapter "First-time use," section "Miele@home."
Miele dryer Remaining time 6 or 11 minutes stays the same
This is not a malfunction.
The appliance has detected residual moisture and continues drying.
Miele dryer Remaining time 10 minutes stays the same
This is not a malfunction.
A larger amount of laundry is being dried compared to previous programs. With fluctuating load sizes, the remaining time may vary. The drying process is not yet complete.
The program requires more time than the electronics estimated at the beginning. The time remains paused until the selected dryness level is reached.
Miele dryer Spinning bars on the display
This is not a malfunction.
At the end of a drying cycle, a cooling phase occurs. This is indicated by rotating dashes on the display. During the cooling phase, the laundry can be removed at any time. Due to its high temperature, the laundry should be spread out and cooled further at room temperature.